WWW.
WAMBAM
FENCE.COM
9
ASSEMBLY
INSTRUCTIONS
VF13003
STEP 3.4
Drive (4) 1¼” Self-Drilling Stainless Steel Screws
(H)
through the middle of the top rail and upper
cavity of the bottom rail as illustrated. The height of the rails can now be adjusted as needed.
H
STEP 3.5
Drive a 3½” Self-Drilling Stain-
less Steel Screw
(G)
through the
posts into the rails.
Note:
Do not over-tighten the
3½” self-drilling stainless steel
screws because it will cause
the vinyl to dimple.
Note:
Position and drive the screws
along the edge of the rounded post
corner as shown. This is to ensure
the rail is properly secured to post.
Top View
G