1
1 - Read Over Fence Instructions First
Your gate and fence will work better together as an integrated
solution if you first take the time to read and understand your
fence instructions.
2 - Pre-Assemble the Gate Frame
(without pickets)
Please do not screw your gate frame together until you have first
temporarily assembled the gate. In other words, do a dry run first.
This will ensure three things:
a) That you have everything necessary to complete the gate.
b) That you will have assembled the gate in the correct order.
c) All the pieces fit and function properly.
It’s easier to trouble shoot when things are not screwed together.
After you assemble your gate correctly, please disassemble as
necessary and use screws to permanently assemble the gate.
3 - Ideally, Install Your Gate Posts
Before Your Fence Posts
Your fence panels will be more forgiving for a custom
fit than your gate. Ideally, position and install your
gate posts before you do anything else, or very early
on in the process of setting up your fence run.
Install Your Gate Posts
Before Installing Your
Fence Posts.
For more information, contact us at 1 877-778-5733.
4 - Ideally, Do Not Hang Your Gate System
Off a Single Non-Supported Post
Your gate will perform better and last longer if your hinge post is connected to a panel of fence which is
connected to another post. The weight strain will be transferred unto two posts versus just one. Installing
fence panels on both sides of your gate is the ideal in all situations. If this is not possible because of space
restrictions, please contact us for alternative solutions to overcome.
Do Not Hang Gate on Lone Soldier Post.
WamBam Nantucket Vinyl Picket Gate
w/Stainless Steel Hardware
