Walvoil SD5, Руководство пользователя

Страница: 60 / 64

SD5
60
DAT003A
Fitting tightening torque -- Nm / lbft
THREADS TYPE P and C ports A and B ports T port
BSP
(ISO 228/1)
G 3/8 G 3/8
G 3/8
(G 1/2
*
)
With O--Ring seal 35 / 25.8 35 / 25.8
35 / 25.8
(50 / 36.9
*
)
With copper washer 40 / 29.5 40 / 29.5
40 / 29.5
(50 / 36.9
*
)
With steel and rubber washer 30 / 22.1 30 / 22.1
30 / 22.1
(50 / 36.9
*
)
UN--UNF
(ISO 11926--1)
3/4--16 UNF--2B (SAE 8) 9/16--18 UNF--2B (SAE 6) 3/4--16 UNF--2B (SAE 8)
With O--Ring seal 40 / 29.5 30 / 22.1 30 / 22.1
METRIC
(ISO 262)
M18 x 1.5 M18 x 1.5
M18 x 1.5
(M22x1.5
*
)
With O--Ring seal 35 / 25.8 35 / 25.8
35 / 25.8
(50
*
)
With copper washer 40 / 29.5 40 / 29.5
40 / 29.5
(50
*
)
With steel and rubber washer 40 / 29.5 40 / 29.5 40 / 29.5
(50
*
)
(
*
) -- Only for series circuit. (
*
) -- Only for series circuit.
NOTE -- These torque are recommended. Assembly tightening torque depends on many factors, including lubrication, coating and
surface finish. The manufacturer shall be consulted.
The SD5 valve is assembled and tested as per the technical specification of this catalog.
Before the final installation on your equipment, follow the below recommendations:
-- the valve can be assembled in any position, in order to prevent body deformation and spool sticking mount the product on a flat
surface;
-- in order to prevent the possibility of water entering the lever box and spool control kit, do not use high pressure wash down directly
on the valve;
-- prior to painting, ensure plastic port plugs are tightly in place.
Installation and maintenance
A2
P
T
C
A1
B1
B2
Power beyond configuration