User Interface
33
Waltron User Manual 101-016-B.3
3041 Silica Analyzer
5.4
REAGENT REFILL
The remaining reagent is shown as a percent (%) at the bottom of the main display screen.
If the reagent level falls below a value of 4%, the analyzer goes into FAULT status and stops
automatically. The alarm message will be displayed in the main menu and the FAULT contact
will be activated.
Every time the reagents are refilled, it is necessary to reset the value to 100%.
1.
Press on the value % of each displayed reagent.
2.
Bottle Reag. 1,2,3 Filled? YES.
Figure 5.2: User interface screen for Reagents Refill.
