P 5
Please retain product label and instructions for future reference
Step 7
30mm
16mm
Opening Window
Fixed Window
30mm
screw
30mm
screw
16mm
screw
30mm
screw
Place the window strip 11mm above
the window gap in the window panel
and fix with 3x30mm screws.
If you would like the windows to be
opening use the butt hinges to
attach the opening window strip
and the opening window together.
Use 30mm screws to fix the butt
hinge to the Window Strip and
16mm screws to fix it to the
Opening Window.
If you want to fix the opening
windows, instead of fixing butt
hinges to the opening window,
use 4x30mm screws to attach
the opening windows to the
window panel as shown in the
diagram.
3x30mm Screws
*SCREW COUNT PER WINDOW
6x30mm Screws
6x16mm Screws
4x30mm Screws
Lay the window panel down on a flat surface
before fitting the window strip and window.
22
16
16
11
11
Step 8
Place floors on a firm and
level base, ensure base has
suitable drainage free from
areas where standing water
can collect. (see front page
on base requirements).
Ensure floors are flush to
each other and fix using
8x50mm screws. Alternate
fixing positions along the
length of the floors.
*Note
Floors do not connect
by a T & G joint
8x50mm screws
1
1
50mm
screw
Pre drill
hole
Step 9
Fix the corners with 3x
50mm screw a shown in
diagram.
Position the panels so there is
equal spacing between the floor
and cladding on all 4 sides
3x50mm screws
1
Plain and window panel
can be positioned on
either side.
8
50mm
screw
Pre drill
hole
