3 Transport
Page 10 of 19
Installation Manual WMV-BA-10
EN
3 Transport
Packaging
The Material Distributor will be prepared by Walther Systemtechnik GmbH for a transport to the first
destination.
The type of packaging depends on the individual mode of shipping. If not separately contracted, the
packaging is in accordance with the rules and regulations of Walther Systemtechnik GmbH.
The packing unit will not be exposed to any additional strain. Packaging and contents will be protected
against any kind of humidity. The temperature for transport and storage will strictly range between:
–20°C and + 40°C.
Transport and Damages in Transport
The actual transport of the Material Distributor and its individual parts requires special care in order to
prevent damages from external forceful impact or careless on- and off-loading.
Depending on the mode of transportation, suitable transport and load securing has to be selected.
The device will be aligned and leveled by appropriate fastening elements.
The following will be observed when the receiving checks reveal damages in transport:
•
Contact the carrier (carrier, train etc.)
•
Write a protocol of damages
•
Contact the supplier
Location of Set-up
•
At the actual location, clarify all legal requirements and make sure that you adhere to them.
•
The WMV was designed for rooms which are protected against atmospheric influences.
•
Operation or storage in aggressive or humid surroundings or outside can cause damages from
corrosion for which Walther Systemtechnik GmbH cannot be made liable.
•
All open parts and lines will be arranged in such a way that they will not cause injuries or
damages.
