Operating Manual WLVCM-BA-10
Page 9 of 37
EN
2 Safety
2.1 General Information
The construction of this device is according to the latest technology and is absolutely reliable. The individual
components as well as the complete device are continuously checked by our quality management team.
2.2 Basic Safety Instructions
Basic conditions for a safe handling and a failure-free operation of the device are:
CAUTION
Danger through improper use
It is the customer’s responsibility that
all relevant safety measures
are followed.
The device will only be used for the designated purpose.
No changes will be made at the device. The customer carries the sole responsibility
for consequences resulting from failure to observe this guideline. Please contact
Walther Systemtechnik GmbH for any desired modifications.
Make sure that the device is always in a safe operational condition. Checks for
proper function or damages have to be performed by specialists on a regular basis.
Dismounting will only be made by authorized personnel and while using the
operating manual. If requested, we will also offer trainings on the device in order to
teach your personnel the required knowledge.
Disconnect the device from compressed air / grease supply for all maintenance
tasks. All lines and hoses have to be pressure-less.
Check all lines, hoses and screwed joints regularly for leakages and apparent
damages! Repair damages immediately!
Always make sure that the actual workstation and the device are clean and clearly
arrange; and this is routinely checked.
Please observe the guiding rules and regulations for accident prevention at the
workplace.
2.3 Dangers from Using the Device
The construction of this device is according to the latest technology and is absolutely reliable. However,
there may be dangers for the user or third parties or other physical assets, if not used correctly.
WARNING
Danger through improper use
The machine is only to be used for the intended purpose and in a safe and secure
condition.
Immediately correct failures, which can adversely affect safety and security!
CAUTION
Dangers from residual energy
Please instruct the operating personnel on the respective measures to be taken
against the occurrence of mechanical, hydraulic, pneumatic and electric / electronic
residual energies.
