Rev. 1.3
Assembly Instructions
– Spray Valve SMS-05
Page 29 of 31
Walther Systemtechnik GmbH
– D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de
10.8.2 Add-on Elements
Needle Sensor
The mounting of the needle sensor will be made factory-side. It will be integrated in the raster needle lock
(Pos. 15.4 Spare Part List). If ordered as spare part, please note that a complete raster needle lock will be
delivered as the initiator has to be set at the factory and also glued in.
Pos.
Description
1
Raster needle sensor
Pressure Sensor
The installation of the pressure sensor will be made factory-side. Its actual position can be either at the side
(left or right) or on top. Please refer to the assembly instructions
„Pressure Sensors 97PA-21x-xxx“
for addi-
tional information.
Pos.
Description
2
Pressure sensor mounted on top of the spray valve
3
Pressure sensor mounted at the right side of the spray valve
Hotplate
The heating plate will be mounted factory-side. Its actual position will be at the side (left / right). Please see
the descrip
tion „
Heating and Accessories
“
for additional information.
3
2
1
