WALTHER PILOT PILOT WA 900, Руководство по эксплуатации

Страница: 13 / 15

24 25
8 Fehlersuche und -beseitigung
Warn
i
ng
Prior to any servicing and repair work: Make sure that the spray gun is in an
unpressurized condition, i.e. all air and material inputs must be shut off - if not, there
is a risk of injury.
Problem Cause Possible Remedy
Gun is dripping
Material nozzle or
needle fouled
Material nozzle or
needle damaged
Packing screw (Item 12) too
tight
see 5.5 Retooling the Spray
Gun and Cleaning
see
7.2 Replacing Needle,
Nozzle,Seals
Loosen packing screw slightly
with a screwdriver
Gun fails to open Control air pressure too low Increase control air
pressure to at least 4.5 bar
Material leaks
from leakage
boring
Needle packing leaks
Packing screw too loose
see
7.1 Replacing Needle
Seal Packing
Tighten packing screw slightly
with a screwdriver
Spray jet
pulsating or
unsteady
Level in material
tank too low
Top-off material level (see
operating instructions of plant
systems manufacturer
9
Disposal of Cleaning / Servicing Substances
Disposal of any such substances must be in accordance with all applicable local
and national regulations, directives and laws.
Warn
i
ng
Pay special attention to all processing specifications and safety warnings issued by
the manufactureres of the spraying and cleaning media. The improper disposal of
any toxic waste material represents a serious threat to the environment and to the
health of human and animal life.
Technical Specifications
10
Nozzle sizes:
•
0,3
•
0,5
•
0,8
•
1,0
•
1,2
•
1,5
•
1,8
•
2,0
•
2,2
•
2,5
•
3,0
• 3,5 mm ø
Weight:
Spray gun with internal control:
500 g
Spray gun with external control:
480 g
Plated aluminum adapter plate:
195 g
Stainless steel adapter plate:
310 g
Connections
Atomizing Air
PU Außen
ø
8 mm
Control Air
PU Außen
ø
6 mm
Material Supply
G 1/4“
mind. 4,5 bar
max. 8
bar
Pressure Ranges
Control Air
Material Pressure
:
Atomizing Air
: max. 8 bar
max.
Operating
Temperature of Spray
Gun
80 °C
Sound Level
(
measured at a distance
of 1m from the spray gun
) 86 dB (A)
Air Consumption
:
Air Cap Inlet Pressure to
the gun
Air consumption
PILOT WA 900 1038 4,0 bar L/min.
PILOT WA 920 HVLP 1061 3,5 bar L/min.
PILOT WA 940 HVLP
PLUS
1060 3,4 bar L/min.
Air Cap Inlet Pressure to
the gun
Air consumption
PILOT WA 905 1038 4,0 bar L/min.
PILOT WA 925 HVLP 1061 3,5 bar L/min.
PILOT WA 945 HVLP
PLUS
1060 3,4 bar L/min.
*
At an inlet air pressure of 4.5 bar, the spraying air pressure is 0.7 bar.
Subject to technical changes.