WALTHER PILOT IV, Руководство по эксплуатации

Страница: 10 / 17

19 18
Listing of Contents
Exploded Drawing 2
Declaration of CE-Conformity 19
Replacement parts 20
1 General 21
1.1 Identification of Model Versions 21
1.2 Normal Use 21
1.3 Improper Use 22
2 Technical Description 22
3 Safety Instructions 23
3.1 Safety Warning Symbols 23
3.2 General Safety Instructions 23
4 Connection of Input Line 24
5 Operational Handling 24
5.1 Safety Instructions 24
5.2 Starting / Stopping Requirements 25
5.3 Spray Pattern Test 25
5.4 Spray Pattern Adjustments 25
5.5 Retooling the Spray Gun 26
5.6 Correction of Spray Pattern Imperfections 27
6 Cleaning and Maintenance 27
6.1 Safety Instructions 27
6.2 Cleaning Complete 28
6.3 Cleaning Routine 29
7 Repairs / Replacements 29
7.1 Replacement of defective Needle Seal Packing 29
7.2 Replacement of Material Control Nozzle and Needle 29
8 Trouble shooting and Corrective Action 30
9 Disposal of Cleaning / Servicing Substances 31
10 Specification Data 31
EC/EU Declaration of Conformity
We, the manufacturers of the equipment, hereby declare under our sole responsibility
that the product(s) described below conform to the essential safety requirements. This
declaration will be rendered invalid if any changes are made to the equipment without
prior consultation with us.
Manufacturer WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18 - 30
D - 42327 Wuppertal
Tel.: +49(0)202 / 787 - 0
Fax: +49(0)202 / 787 - 2217
www.walther-pilot.de • e-mail: info@walther-pilot.de
Type Designation Hand-held Spray Guns PILOT IV / PILOT IV GM
PILOT IV Gravity-Feed Cup V 11 401
PILOT IV GM Gravity-Feed Cup V 11 441
Intended purpose Processing of sprayable media
Applied Standards and Directives
EU-Mechanical Engineering Directives 2006/42/EC
2014/34/EU (ATEX Directives)
DIN EN ISO 12100
DIN EN 1953 DIN EN 13463-1
DIN EN 1127-1 DIN EN 13463-5
Specification according 2014/34/EU
Category 2 Part marking II 2 G c T 6
Tech.File,Ref.:
2403
Authorized with the compilation of the technical file:
Nico Kowalski, WALTHER Spritz- und Lackiersysteme GmbH, Kärntner Str. 18 - 30
D- 42327 Wuppertal
Special remarks :
The named product is intended for installation in other equipment. Commissioning is
prohibited until such time as the end product has been proved to conform to the
provision of the Directives 2006/42/EC.
Wuppertal, the 2nd of November 2016
Name: Torsten Bröker
Position: Manager, Design and Development
This Declaration does not give assurance of properties in the sense of product liability. The safety
instructions provided in the product documentation must be observed at all times.
p.p.