Walter systemtechnik WIF-BA-10, Руководство по эксплуатации

Страница: 14 / 18

5 Service and Maintenance
Page 14 of 18
Operating Manual Inline Filter WIF-BA-10
EN
5 Service and Maintenance
General Information
CAUTION
Prior to any repair or maintenance work, make sure that pressure is removed from
all supply lines/line systems and disconnect from Inline Filter!
Pay attention to spring tension!
5.1.1 Replacing the Filter Cartridge
In order to prevent malfunctions, filter cartridges will be replaced at regular intervals.
Have a suitable filter cartridge ready.
Do not remove packaging from filter cartridge before it is actually inserted. Pay attention to
cleanliness. Do not filter cartridge with dirty hands.
Open filter housing:
CAUTION
Blue screw joint has spring tension.
Completely unscrew blue screw-joint and remove.
Replace filter cartridge:
Remove filter cartridge from housing
IMPORTANT
Pay attention to the correct flow direction when installing!
Short (colored) end of filter cartridge will point towards INLET.
Properly insert new filter cartridge.
Close filter housing:
Put on blue screw joint and screw in the opposite direction until fastened.