32
8.2 Setting the luminosity (dimming function) on the unit
• Switch the light on at the ON / OFF switch (5) (if not already done).
• The display shows the luminosity in % as last set.
• The luminosity can be adjusted in 1 % steps from 10 to 100 % by means of the rotary
control (4) in 1
.
• The value for the luminosity is immediately accepted by the unit, saved and shown in the
display
(7)
.
8.3 Setting the colour temperature on the unit
• Switch the light on at the ON / OFF switch (5) (if not already done).
• Press the rotary control
(4),. The colour temperature indicator flashes in the display.
•
Turn the rotary control (4) to set the desired colour temperature.
•
The colour temperature can be adjusted in steps of 100 from 3,000 to 6,500 Kelvin.
•
The value for the colour temperature is immediately accepted by the unit, saved and shown in
the display.
(7)
.
8.4 Setting the remote control channel on the unit
• Switch the light on at the ON / OFF switch (5) (if not already done).
• The display (7) shows the currently set channel.
• Press the
channel selection button (6). In the display (7) the channel indicator flashes.
• The channel can be set from 1 - 99 with the rotary control (4).
8.5 Setting the different "FUN" modes F1-F5
• Switch the light on at the ON / OFF switch (5) (if not already done).
• Press and hold the rotary control
(4). The set mode (F1-F6) flashes at the bottom left of the
display
(7)
.
• Turn the rotary control (4) to switch between the different FUN modes
.
• By pressing the control dial (4), the interval indicator at the bottom right of the display flashes.
Turn the control dial (4) to adjust the interval of the set mode from weak (1) to strong (9).
• By pressing the rotary control (4) again, the display (7) changes back to brightness mode
(the brightness display flashes) and the luminosity can
be adjusted in 1 % steps from
10 to 100 % using the rotary control (4).
.
• Press and hold the control dial (4) to exit the FUN mode setting.
