~ 6 ~
10. Fault finding
(Make sure electricity supply has been switched off before trouble shooting)
Fault
Cause
1. Motor does not start
1. No electricity supply.
2. Fuses blown or breaker tripped.
3. Overheating relay tripped.
4. Defective magnetic contacter.
5. Control circuit malfunction.
2. Motor cut out during operation.
1. Fuses blown or breakers tripped.
2. Overheating relay tripped.
3. Control circuit malfunction.
4. Pump locked by foreign objects
3. Pump gives unstable discharge.
1. Pump impeller blocked by foreign
objects.
2. Insufficient liquid level. ( See Sec.4.2)
4. Pump runs but no water is discharges.
1. Suction filter blocked by foreign objects.
2. Low liquid level. (See Sec.4.2.)
3. Incorrect rotating direction.