background image

Always charge at least every 3-6 months to prevent over discharge.

Transportation of Lithium-Ion Batteries

Always check all applicable local, national, and international regulations before transporting
a unit containing a lithium-ion battery.

Transporting an end-of-life, damaged, or recalled battery may, in certain cases, be
specifically limited or prohibited.

SAFETY INSTRUCTIONS FOR JUMP STARTER

WARNING: RISK OF EXPLOSIVE GASES

Working in the vicinity of a lead acid battery is dangerous. Batteries generate explosive
gases during normal battery operation. For this reason, it is of the utmost importance that
each time before using the jump-starter you read this manual and follow instructions
exactly.

CAUTION: TO REDUCE THE RISK OF INJURY OR PROPERTY DAMAGE:

NEVER ATTEMPT TO BOOST OR CHARGE A FROZEN BATTERY.

When working with lead acid batteries, always make sure immediate assistance is available
in case of accident or emergency.

Never smoke or allow a spark or flame in vicinity of vehicle battery, engine or jump starter.

Remove personal metal items such as rings, bracelets, necklaces and watches when
working with a lead acid battery. A lead acid battery can produce a short circuit current high
enough to weld a ring, or similar metal object, to skin, causing a severe burn.

Do not operate unit with damaged cord or plug; or if the unit has received a sharp blow, been
dropped, or otherwise damaged in any way. Do not disassemble the unit, opening the unit
may result in a risk of electric shock or fire.

Do not leave the unit unattended while in use.

This unit is not for use by children or infirm persons.

Disconnect adapter by pulling the plug rather than the cord when disconnecting the AC
charging adapter.

SAVE THESE INSTRUCTIONS
INTRODUCTION
Congratulations on purchasing your new Lithium battery jump starter. Read this
instruction manual and follow the instructions carefully before using this unit.

IMPORTANT Notes:

The jump starter is designed for use on small to mid-sized vehicle batteries( 6 cylinder or
smaller).

Several factors can affect the jump starter’s ability start the vehicle, including, but not limited
to the size of the vehicle battery, the temperature(hot or cold), whether the battery is
damaged or defective, and whether the jump starter itself has sufficient power.

Before starting the vehicle, be sure all vehicle accessories(i.e. Heater, fan, radio, TV,
lights,etc.) are turned off.

POWER STATUS INDICATOR LIGHTS
Before using the unit, checking the power status whether itself has sufficient power.

Press the power button, the LED power indicator turn light. Refer to below features:

Содержание EverStart









Отзывы: