WALLMEK
i Kungälv AB – Special tools for auto repairs
www.wallmek.se
•
•
Tel. +46(0)303 58580
•
Bultgatan 18 442 40 Kungälv, Sweden
12
‐
000042
|
Rev:
A
|
Date:
2009
‐
04
‐
21
Page
2/2
1.
Mount the tool directly on the hub
as in the picture. Use the original
bolts for the brake disc.
2.
Adjust the inner press axle towards
the axle shaft and start pressing.
3.
If the wheel bearing doesn’t
separate from the axle shaft when
using full pressure it’s possible to
punch with a hammer (always use a
punching socket as in the picture)
in the cylinder’s pressing direction.
4.
Clean from rust and assemble the
new wheel bearing on the axle
Manual for Iveco wheel hub/bearing puller no. 1091-27
Punching socket 1086-6
Original bolts for the brake disc, 3 pc.
