7
WDC200-NX Electronic Water Management.
Revision-2
3 Glossary
The glossary lists all words, abbreviations and technical terminology used in this
manual, along with a short description of these terms.
Term
Description
Auto-run
The outputs to the water valves for basin, shower
and WC can be set to automatically operate at a
set time every day. The water valve will operate
for the cycle set run time as per a user activation.
The Auto-run feature can be used for maintaining
hygiene standards similar to the Inactivity Purge
function detailed below.
Building Management
System
BMS
A Building Management System is a computer
based control system installed in buildings that
controls & monitors the building’s mechanical and
electrical equipment such as ventilation, lighting,
power systems, fire systems, and security
systems.
WDCMS
The WDCMS Wallgate system is used for
standalone networking of the WDC control units
to a dedicated PC or laptop computer. You can
manage the WDC units through the network. You
can also adjust time cycle settings, lockout
settings, remote water isolation on individual units
or groups, RTC settings, etc. You can also view
the unit status in real time and log data.
Data Logging
Activations of the Inactivity Purge function
detailed below are logged in memory and then
using additional software the logs can be
downloaded from the WDC200-NX and imported
into a spreadsheet report.
Dual Flush
This option is used when both full and half flush
options must be provided, using either one or two
piezo touch buttons.
Full Flush
This feature uses a 6 litre or 4.5 litre flush.
Reduced & Half Flush
The reduced flush is
⅔
of a full flush and the half
flush is ½ of a full flush.
Inactivity Purge
This feature operates the basin, shower, and WC
water services when they are unused for a
specified number of days. This avoids water
stagnation when the water services are unused
for longer periods.
Latching
A latching switch is a switch that maintains its
state after being activated.
