Wallenstein QC605, Руководство оператора

Страница: 29 / 38

QC605 / B, QC620
Skid Steer Mounted Backhoe
Storage
29
7. Storage
When the backhoe is not going to be used for a period
of time, remove it from the skid steer and place it in
storage.
• Store in a dry, level area away from human activity.
Support the frame with blocking as required.
• Do not allow children to play on or around a stored
machine.
7.1 Placing in Storage
1. Clean the backhoe removing all mud, dirt and
grease.
2. Inspect the bucket and boom for damage or
entangled material. Repair or replace damaged
parts. Remove all entangled material.
3.
Lubricate all grease fittings. Make sure all grease
cavities have been filled with grease to remove any
water residue from washing.
4. Select a storage area that is dry, level and free of
debris.
5. Fully retract the bucket cylinder and lower the
backhoe onto wood blocking.
6.
Disconnect hydraulic hoses from skid steer.
7. Cover the ends of the hydraulic couplers to keep
them clean. Stow hydraulic hoses in storage
brackets to keep them off the ground.
8. Touch up all paint nicks and scratches to prevent
rusting. Replace any damaged safety signs.
9.
Apply a coat of heavy grease to any exposed area
of cylinder rod to prevent rusting.
10. If the machine cannot be stored inside, cover with
a waterproof tarp.
7.2 Removing from Storage
1. Attach backhoe to the skid steer as indicated on
page 23.
2. Check all fasteners and torque-tighten as required.
3. Check all hydraulic lines, fittings and connections
for leaks. Tighten as required.
4. Remove grease or protective coating from cylinder
rod.
5. Check condition of bucket teeth. Replace as
necessary.
6.
Review and follow the Pre-operation Checklist.
See Pre-Operation Checklist on page 25.