Wallenstein P3 PULSE WP1624 Скачать руководство пользователя | Manualshive

Страница: 34 / 88

background image

Controls

WP1624 Series

Firewood Processor

34

5.3 Operator Platform and Seat

The operator seat can be adjusted.

00317

1

2

Fig. 12 –

Operator's Seat

1. Height Adjuster Bolt
2. Snap Lock Pin

Adjust Seat Height

•

Remove the height adjuster bolt, set the desired the height
and reinsert the bolt.

IMPORTANT! When transporting the firewood processor on
a roadway or when the seat is not in use, pull the snap lock
pin and lean the seat over. Reinsert the pin to secure it out
of the way.

5.4 Conveyor Controls

This section describes the controls for conveyors that are
optional equipment. An integrated 12 ft (3.6 m) is pinned to the
rear of the machine. A self-contained hydraulic 24 ft (7.3 m)
conveyor stands separately from the machine.

Conveyor controls are located on the machine and connected
through the hydraulics system To change the conveyor angle,
pull the snap lock pin and push the conveyor to one side or the
other.

5.4.1 Conveyor Hydraulic Control Valve

• Forward-

Pull the lever away from the machine (into detent)

to move the conveyor chain forward.
The lever stays in this position until an operator moves it.

• Backward-

Push the lever toward the machine and hold to

move the conveyor chain backward.
This may be repeated in intervals.

00406

Fig. 13 –

Conveyor Control Lever

«
...
32
33
34
35
36
...
»

Содержание P3 PULSE WP1624

























































































Отзывы:

Нет отзывов

Похожие инструкции для P3 PULSE WP1624

Бренд: Napoleon Страницы: 2

Бренд: Raytheon Страницы: 62

Бренд: made for movement Страницы: 51

Бренд: Eagle Eye Страницы: 21

Бренд: Labomed Страницы: 67

Бренд: h/p/cosmos Страницы: 81

Бренд: Idmed Страницы: 2

Lab companion SI-300

Бренд: Jeio tech Страницы: 69

IP Video Test Option HST-3000

Бренд: JDS Uniphase Страницы: 4

Бренд: Jct Страницы: 16

Бренд: Laserworld Страницы: 8

Бренд: Laserworld Страницы: 6

Бренд: LaserLiner Страницы: 56

Бренд: LaserLiner Страницы: 54

9NP-B7524 Series

Бренд: Nautilus Страницы: 2

Be strong NS 700X

Бренд: Nautilus Страницы: 34

Бренд: Nautilus Страницы: 21

Бренд: Ofa Bamberg Страницы: 80

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды