Wallenstein MX130P, Руководство оператора

Страница: 28 / 44

8.3.1 Grease Points
IMPORTANT! Use a hand-held grease gun for all greasing.
Pump one shot of grease per fitting.
• Wipe the grease fitting with a clean cloth before applying
the grease to avoid injecting dirt and grit.
• Replace and repair broken fittings immediately.
• If a fitting does not accept grease:
-
Remove and clean it thoroughly.
-
Clean the lubricant passageway.
-
If required, replace the fitting.
Location Every 8 hours of Operation
Number
of Grease
Points
1 PTO-shaft universal joints 2
2 PTO-shaft slip joint 1
01397
1
2
Fig. 15 –
8-hour Grease Points
Location
Every 50 hours of
Operation or Annually
Number
of Grease
Points
3 PTO-shaft bearings 2
4 Beater-bar bearings 2
5 Rear apron-drive bearings 2
6 Pillow-block bearing 1
7 Front beater-bar drive bearings 1
8
Front apron-drive chain
sprockets
2
9 PTO-shaft shield 2
10 Engagement-ratchet lever 1
Service and Maintenance
MX130P
Manure Spreader
28