Wallenstein LXG300 Series Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 52

Wallenstein LXG300 Series Скачать руководство пользователя страница 34

Operating Instructions

LXG300 Series

Grapples

34

Read the winch operator's guide supplied with the machine to
familiarize yourself with its safe operating procedures.

Review Winch Safety on

The single speed hydraulic winch has a capacity of 9,000 lb
(4082 kg) and can be used to winch up logs that are otherwise
inaccessible.

WARNING!

Synthetic rope that fails under tension can snap

back with great force causing injury or death.

Avoid sudden jerks, quick starts or stops. Start

slowly and smoothly. Replace if kinked, badly

frayed, has knots, cuts, or broken strands.

W095

CAUTION!

Avoid the risk of rope failure. Do not replace rope

with one that is not approved for use on this

winch. Rope properties may be unknown and

failure could result. Refer to the parts manual for

replacement rope type.

W094

7.9.1 Winch Safety

• Never stand in line with the path of a rope under tension.

Stand at least 10 ft (3 m) to the side to activate the
winch. If a rope breaks under tension, it can snap back
in an unpredictable direction with great force. The recoil
may cause injury or death to a person in its path.

01437

Fig. 30 –

Winching Logs

7.9 Winching

(LXG330RP models)

IMPORTANT! Always use a choker chain. NEVER wrap the
winch rope around the log or hook the forged end back onto
the rope. Damage to the rope can result that is not covered
by warranty.

«
...
32
33
34
35
36
...
»

Содержание LXG300 Series





















































Отзывы:

Нет отзывов