21
BXTR6438
4.1 Hood Deflector:
The discharge chute is equipped with a hood deflector
on the end of the chute to direct the chips exactly where
desired. The deflector is held in position by a slotted
position handle.
1. Grasp the handle and lift slightly to clear the handle
cogs.
2. Move the deflector with the handle as required.
3. Lock the deflector into position by lowering the handle
into one of the slots.
Slots
Deflector
Grip Handle
Latch Handle
4.2 Discharge Chute:
The discharge chute is designed with a spring-loaded latch
handle that allows the chute to be positioned 360° then
locked into position with the latch.
1. Lift the latch handle till the chute lock pin disengages.
2. Use the latch and grip handles to position the chute
as required.
3. Release the latch handle and lock the chute into
position at the next nearest lock point.
