Wallenstein BXT52S, Руководство оператора

Страница: 54 / 76

9.5 Engine Maintenance
For full engine maintenance information, see the engine
manufacturer's manual.
9.5.1 Engine Maintenance Safety
WARNING!
Do not operate the engine indoors. Park the
machine outdoors in a position where the
prevailing winds blow the exhaust away from
you.
Engine exhaust contains carbon monoxide (CO)
that can quickly accumulate to a dangerous
level. Carbon monoxide can cause illness,
unconsciousness, or death.
W072
WARNING!
Keep the end of a disconnected battery cable
away from the battery. Electricity can arc from
the battery to the end of a battery cable and
cause the battery to explode. An explosion can
cause serious injury or death from heat, impact,
and chemical hazards.
W115
For more information, see Engine Operation Safety on page
30.
• Remove the wire from the spark plug before servicing the
engine or equipment to prevent the engine from starting.
• Examine the muffler on a regular basis to make sure that it
operates effectively. Repair or replace a muffler that is worn
or leaks.
• Before storage, replace fuel that contains ethanol with
an alkylate or appropriate engineered fuel to prevent the
buildup of deposits.
• Check the fuel lines and fittings frequently for cracks or
leaks. Replace fuel lines or fittings that are damaged.
• Store fuel away from all wood material.
• Do not check for a spark with the spark plug or spark plug
wire removed.
• Do not hit the flywheel with a hard object or metal tool. This
can cause the flywheel to shatter during operation. Use the
correct tools to service the engine.
• Do not touch a hot muffler, cylinder, or fins. Contact can
cause burns.
9.5.2 Electronic Fuel Management System
Maintenance Safety
The engine has an electronic fuel management (EFM) system
that monitors the engine speed, temperature, and battery
voltage. The EFM system cannot be adjusted.
For more information, see Electronic Fuel Management System
Operation Safety on page 31.
• Do not start the engine if the battery cables are loose.
• Turn the key to the STOP position or remove the starter
switch before disconnecting, removing, or installing the
battery.
• Do not use a battery charger to start the engine.
• Do not disconnect the battery cables while the engine is
running.
• When connecting the battery cables, first connect the
positive (+) cable and then connect the negative (-) cable
to the battery.
• When charging the battery, turn the ignition switch to the
STOP position and disconnect the negative (-) battery cable
from the battery.
• Do not spray water directly on the Electronic Control Unit.
Service and Maintenance
BXT52S
Wood Chipper
54