Wallenstein BXMT4224, Руководство оператора

Страница: 23 / 52

CHOKE
Choke
This left/right slider controls
the position of the choke. Slide
the choke to the right to close
the choke for starting when the
engine is cold. Slide the knob
to the left to open the choke as
the engine warms. Always slide
the choke fully to the left when
operating the machine.
Ignition Switch
The BXMT4238 ignition switch has three positions—OFF, RUN,
and START.
OFF – The engine is off in the OFF position.
Turn the switch counterclockwise to OFF to
stop the engine.
RUN – In the RUN position, the fuel supply
solenoid supplies fuel to the engine. The
machine operates in this position.
START – In the START position, the starter
engages. When released, the switch returns
to RUN.
5.3 Shredder Feed Gate Lever
The shredder intake is designed with spring-loaded gates to
allow the material in the hopper to move into the shredder rotor
and close when unattended.
Levers on each side of the hopper control the position of the
gate. Move the lever down to allow the material to move into the
shredding rotor. Release the lever and the spring will move the
gate into its closed position. BXMT4224 and BXMT4238 have
dual gates. BXMT3209 and BXMT3213 have a single gate with
levers on each side.
01032
Fig. 12 – BXMT4224 Feed Gate Levers
5.4 Discharge Chute
The discharge chute can rotate 360°. A spring-loaded latch
handle locks it in position when released.
Lift the latch handle until the chute lock pin disengages, rotate
the chute as required, and release the latch handle. Make sure it
locks it in position at the next nearest lock point.
01033
Fig. 13 – Discharge Chute Rotation
BXMT4224 / BXMT4238
Trailer Chipper-Shredder
Controls
23