Wallenstein BXMT32G, Инструкции по установке

Страница: 2 / 14

2
BXMT32G
Chipper / Shredder
Setup Instructions
Safety
WARNING!
Do not assemble the machine before you read
the assembly instructions in this manual. Make
sure that you understand the safety information
and each step of the procedure before you
assemble the machine.
Keep this manual with you and available
for frequent reference as you assemble the
machine.
WARNING!
Use a hoist when to lift machine components
that weigh 50 lb (23 kg) or more. Do not lift
machine components that weigh more than you
can lift without strain or injury.
WARNING!
Use lift equipment with a lift capacity that
is more than the weight of the machine
component. Put jack stands or wood blocks
under the machine to make it safe while you
assemble the machine.
WARNING!
Use the correct tools and equipment to
assemble the machine. The use of incorrect
tools can create safety hazards. A tool that
breaks or slips during assembly risks personal
injury. Repair or replace equipment or tools that
are broken or defective.
WARNING!
All lifting equipment (for example, straps,
slings, chains, or ratchet blocks) must comply
with the applicable local laws, standards, and
regulations. Wallenstein Equipment does not
accept responsibility for the use of unsafe
equipment and work practices.
WARNING!
Know the location of and keep away from
overhead power lines and obstructions when
you lift the machine. Contact with power lines
can cause electrocution. Contact with overhead
obstructions can damage the machine or
components.
WARNING!
Do not start or operate the machine before you
read the Operator's Manual. Make sure that
you fully understand all safety, operation, and
maintenance information before you operate
the machine.
Keep the Operator's Manual with the machine at
all times and available for frequent reference.
WARNING!
Make sure that all the fasteners are installed
and torqued to the correct specifications. For
more information, see Specifications on page
13.
CAUTION!
Keep the assembly area clean and free of debris
to prevent slips, trips, or falls.
IMPORTANT! Inspect the machine for damage from
shipping. Contact the shipping company immediately if you
find any damage to the machine.
Some components are attached to the skid with
screws. Make sure that you only discard the
shipping brackets.
Put the crate in a large, open area so that you can
access the machine components from all sides
during assembly.
Learn what the safety labels mean and know the safety
hazards.