Wallenstein 2E9US111XNS091454, Руководство оператора

Страница: 38 / 72

Operating Instructions
BXTR6438
Trailer Wood Chipper
38
5.7 Machine Set-up
WARNING!
Always use the machine outdoors and park
the machine in a position where the prevailing
winds blow the engine exhaust away from the
operator. Exhaust from the engine contains
carbon monoxide (CO) that can accumulate to a
dangerous level, even in an area with good air
fl ow.
W006
CAUTION!
Maintain a safe distance from the area where
the machine expels the wood chips. Use the
discharge chute and/or hood defl ector to direct
the expelled material away from the work area, all
people, animals, and objects.
The machine can expel wood chips fast enough
to cause eye, cut, and impact injuries and/or
property damage.
W024
Follow this procedure to prepare and set-up the machine at the
work site:
1. Use the tow vehicle to position the Wood Chipper at the
work site.
2. For greater stability leave your chipper attached to the tow
vehicle. The chipper can be used as a stand alone, but be
sure to chock the wheels.
3. Lower the crank jack so that the machine is stable.
4. Open the latch on the feed table and carefully lower the feed
table.
5. Turn the discharge chute to the desired position and adjust
the defector as required.
6. Check the battery cable and if required, connect the cable
and tighten fastener securely to ensure a good connection.
01577
Fig. 29 –
Setting Chipper up to Work