Wallenstein 2E9US1110PS051112, Руководство оператора

Страница: 56 / 68

Service and Maintenance
BXTR5224
Wood Chipper
56
Adjusting
5. Loosen the jam nuts on the outside of the ledger knife
support.
6. Turn the adjuster nuts (2) clockwise so the ledger knife
slides firmly up against the gauge inside the rotor housing.
Remove the ledger knife gauge.
7. Tighten the jam nuts (1).
00154
Fig. 69 –
Adjusting ledger knife clearance
1
2
2
6.17 Ledger Knife – Changing
The ledger knife is removed through the bottom of the chipper.
Procedure
1. Loosen the outside jam nuts (1) and the inside adjuster
nuts.
2. Remove the three bolts (2) holding the ledger knife in place
to allow the blade to fall through the bottom of the chipper.
00154
Fig. 70 –
Changing Ledger Knife
1
2
00155
Fig. 71 –
View of Ledger Knife from underside of Chipper
3. Rotate the ledger knife or replace it.
4. Reverse the above steps to reinstall the knife.
5. Verify clearance before tightening.