Wallbe Sun4Charge, Инструкция по эксплуатации

Страница: 9 / 12

Driving eMobility 9/12
Instruction manual
10 DISPOSAL
Please note that this product must not be disposed
of with household waste. The product must be dispo-
sed of at a designated collection and return point for
the disposal and recycling of electrical and electronic
equipment. Observe all applicable national and local
legislation. Further information can be obtained from
your local authorities.
For safety reasons, the charging station may only be
dismantled by a qualified electrician or a wallbe® spe-
cialist partner. Ask your contact person whether he will
take charge of the disposal for you.
11 TECHNICAL DATA
POWER CLASS 22 kW
Construction type Charging column
Number of charging
points
2
Charging capacity 32 A, 400 V, 3-phase
Dimensions
charging column
(H x W x D)
270 x 536 x 330 cm
Weight (charging column
with roof)
approx. 2 t
Storage temperature -30 to +70°C
Operating temperature -25 to +55°C
Relative humidity 30 to 95% (non-condensing)
Protection degree IP54
Charging socket
2x charging socket type 2
( Additionally available: shockproof
socket)
Power contactor 4-pole, 40 A
Control fuse 1-pole, B6
Integrated
safety devices
RCM-module –
DC fault current detection. 6 mA
contactor monitoring
Lock release module
RCD
(must be installed in the
sub-distribution)
Type A
0,03 A / 40 A
Circuit breaker Not integrated
Authorization RFID,
App
Housing lockable Optional
Energy meter Yes
Protocols Modbus TCP/RTU, OCPP 1.6J
Interfaces Ethernet RJ45, RS485, GSM/UMTS
Protection class 1