Driving eMobility
15/18
Installation manual
POWER CLASS 22 kW
Construction type
Wallbox or charging column
Number of charging
points
1
Charging capacity
32 A, 230 V, 3-phase
Dimensions
wallbox (H x W x D)
34 x 34 x 17 cm
Weight
wallbox
approx. 7,5 kg
Dimensions
charging column
(H x W x D)
126 x 57 x 18 cm
Weight
charging column
approx. 17 kg
Storage temperature
-30 to +70°C
Operating temperature
(compliant with german
calibration law)
-25 to +40°C
Operating temperature
(not compliant with ger-
man calibration law)
-25 to +55°C
Relative humidity
30 to 95% (non-condensing)
Protection degree
IP54
Charging socket / char-
ging cable
Charging socket type 2
Additionally available:
Cable type 1 or type 2
Firmly attached charging
cable
Type 1 or type 2
Power contactor
4-pole, 40 A
Control fuse
1-pole, B6
Integrated
safety devices
RCM-module –
DC fault current detection 6 mA
contactor monitoring
Lock release module
RCD
(must be installed in the
sub-distribution)
Type A
0,03 A / 40 A
Circuit breaker
Not integrated
Authorization
Key switch,
RFID
Housing lockable
Optional
Energy meter
Yes
Protocols
Modbus TCP/RTU
Interfaces
Ethernet RJ45, RS485
Protection class
1
State according to EN
61851-1
State D with ventilation is not sup-
ported.
Rated voltage U
n
230 V / 400 V AC
Rated operational voltage
U
e
220/380 - 240/415 V 3N
Rated insulation voltage
U
i
500 V
Rated impulse withstand
voltage U
imp
4 kV
Overvoltage category
Category III
Rated current of a circuit
I
nc
32 A fused on the load side,
fused 6 A on the control side
Rated peak withstand
current I
pk
<6 kA
Rated short-time with-
stand current I
cw
6 A
Rated conditional
short-circuit current I
cc
6 A
Rated frequency f
n
50/60 Hz
Pollution degree
3
System according to type
of earth connection
TN or TT
Installation site
Indoor and outdoor installation
EMC classification
Class B
Mechanical impact
protection
IK 8
Mechanical ambient
conditions according to
MessEV
M1
Electromagnetic ambient
conditions according to
MessEV
E1
