Wallbe MAX, Инструкция по эксплуатации

Страница: 12 / 19

Driving eMobility 12/19
Instruction manual
When the authorization was successfull, the follo-
wing message is displayed:
The charging process starts then automatically. The
status LED now shines blue. During the charging
process, the display shows the current charging po-
wer, the charging current and the charging time for
your selected charging point:
3. When the desired state of charge has been reached,
you can stop the charging process by opening the
central locking of your vehicle or end the charging
process via app. The following message is then di-
splayed:
Note: When the vehicle is fully charged, the vehicle
will automatically stop charging.
Note: In case of power failure, the charging plug is
automatically unlocked by the lock release module.
4. Disconnect the charging cable from the electric ve-
hicle. To do this, follow the instructions of your ve-
hicle‘s instruction manual.
5. Then disconnect the charging cable from the char-
ging station.
6. Stow the charging cable carefully back in your vehic-
le.