Driving eMobility
5/10
Instruction manual
4.2 Ending the charging process
Note:
In case of power failure, the charging plug is au-
tomatically unlocked by the lock release module.
1. When the desired state of charge has been reached,
you can stop the charging process, by opening the
central locking of your vehicle.
Note:
When the vehicle is fully charged, the vehicle
will automatically stop charging.
2. Disconnect the charging cable from the electric ve-
hicle. To do this, follow the instructions of your ve-
hicle‘s instruction manual.
3. Hang the charging cable on the cable holder by loo-
sely wrapping the charging cable around the holder.
5
CLEANING
!
CAUTION:
Finish charging before cleaning and
maintenance. In addition, disconnect the charging ca-
ble from a possibly connected vehicle.
You can clean the charging station as follows:
Wipe the outside of the charging station with a dry
cloth.
!
WARNING:
The charging station must not be clea-
ned with a water or steam jet cleaner. A short circuit
may be caused.
!
WARNING:
Do not use harsh cleaning agents. This
can cause damage to health and the charging station.
6 INSPECTION AND MAINTENANCE
The legislator requires that the charging station and
the associated sub-distribution system be checked
once a year for their function and safety.
The inspection and maintenance of the charging sta-
tion may only be carried out by the manufacturer or by
specialist partners certified by wallbe®.
As a result of the inspection you will receive a protocol,
which you should keep in a safe place.
Please also note chapter 9, Warranty.