17.05.2018
5
5.
TRANSPORTATION AND STORAGE
5.1 The SET is transported in its original package by any kind of transport which provides its safety.
5.2 Before the SET is installed it should be stored in its original package in a dry building with natural ventilation.
5.3 The original package of the SET should be used for transportation of the previously installed SET to another place.
6.
DISPOSAL
6.1
The following operations should be performed before the SET is disposed:
•
dismantle of the SET;
•
disassemble the SET. The sequence of disassembling process of the SET is contrary to its assembling sequence;
•
sort the parts by the types of materials used for production of the parts.
6.2
The SET does not contain any hazardous substances.
6.3
Waste disposal is performed according to the requirements of the local Sanitary Regulations and Norms
7.
WARRANTY
7.1 Product warranty period is 12 months.
7.2 The warranty does not cover the following defects:
•
damages acquired during transportation;
•
damages caused by storage, assembling and operation conditions which don’t correspond to the requirements of this Manual.
8. ASSEMBLY INSTRUCTIONS
8.1 Preparation to the installation, tools and equipment.
8.1.1
Unpack the SPORTS SET.
8.1.2 Read the assembly instructions thoroughly.
8.1.3
Put all the components on the preliminary prepared place (a table, a place on floor).
8.1.4
Make sure that package contents match the base configuration of your SPORTS SET.
8.1.5
During assembly you will need the following tools, specified in the Table 3:
Table 3
Designation
Quantity, pcs.
Wrench
S=24х13
mm
1 (included in the package list)
Allen key S=6 mm
1 (included in the package list)
Allen key S=5 mm
1 (included in the package list)
Plummet
Not included in the supply
package
Builder's level
Step-ladder
8.2 Safety measures.
8.2.1
All the assembling/disassembling and installation works should be performed by at least 2 persons.
8.2.2
The presence of children during the SPORTS SET mounting is prohibited.
8.2.3
The SPORTS SET assembling should be performed in steps according to the mounting instructions.
8.2.4 To avoid unauthorized unfastening of screwed joints use sealant.
8.3 Order of assembling and installation of the SPORTS SET.
8.3.1 Install the reel clip item No. 49 on the beam for the swing item No. 19 according to the following assembly scheme:
8.3.2
Assemble stands (items 4 and 5) and the beam for swing’s installation.
