wallas 3007, Быстрый старт

Страница: 12 / 16

- 10 -
- Control panel will display pin code.
**
- you need to give this pin code into
your
mobile device.
Control panel will tell when bonding
was successful.
- If connection is not free (
someone else is already using
the connection) remove old
connection first from Control
Panel . (settings / connections/
remove )
After pairing mobile application and control panel will remember connection when you re-enter into operating range.
Heater OPERATING MODE
can be selected from
application. Select: "Heating" or
"Ventilation".
Application ventilation power
can be adjusted 1 to 6
(highest).
Note . Heater must be stopped
before changing operation
mode from ventilation to
heating.
WiFi Connection
Control panel can be connected to the internet with WiFi connection.
You can then operate your heater with the " Wallas Remote" application trough Internet.
Wifi connection is created trough Wallas Remote application . ( Local connection between application and Control
Panel must be available before setup)
When you first time select connecting, application will ask SSID and Password. Application will share this information
with Control Panel.
NOTE! If you sell heater or give it away you need to clear Wifi settings. ( SSID="empty", password="empty") . You
should remove wallas application from you device.