WALKOLUTION GmbH GEWERBESTRASSE 1 97355 WIESENBRONN GERMANY
PHONE: +49 322 2185 3977 MAIL: [email protected] WEB: WW.WALKOLUTION.COM
REV. STATUS: 11/2022 - SUBJECT TO TECHNICAL CHANGES
Insert the backrest into the recesses in the side parts of the treadmill.
Insert the backrest as far as it will go.
Important: In the side parts you will find small countersunk screws (next step in the
instructions), in which an Allen screw is inserted. Make sure that these screws are not
in the way when you insert them.
If they are, unscrew them with the enclosed Allen key until the hole is completely free.
INSERT THE BACKREST
MTD800R ÄRA
MTD900R KYBUN ÄRA
Setting the height
If necessary, you can increase the height of the backrest by approx. 6 cm. To do this,
pull the backrest up as far as necessary. Important: In any case, make sure that the
Allen screw still grips and that the anchoring is tight.
48
