10
www.WalkinPets.com
The Leg Ring straps go over the top
of the frame, and the black plastic
harness clips have a slot that fits over
the Shoulder Socket screws. Put your
thumb into the round circle and push
upward to lock (you will hear it click into
place). The round circle will face the
ground. Your pet’s legs go through
each ring.
To release, put your thumb in the circle and pull
downward. Now, you can slowly lower your pet
to the ground. The excess Velcro
®
strapping can
cross over your pet's back, or Velcro
®
together to
form handles (see photos p.11).
Rear Support Leg Rings
The Leg Rings support your pet’s
hindquarters. They will take the weight off
the legs while still allowing your pet to use
their legs to maintain muscle mass. The Leg
Rings should hang no lower than 3" below
the frame. This will create a supportive
cradle.
When your pet is in the Leg Rings, the wheelchair knuckle should be
centered with the hip joint. The Leg Rings should look like two Cs,
not two Vs, with the center connector holding them together.
legs go
inside
each ring
Correct
Incorrect
Clip the Leg Rings to the Wheelchair
Shoulder Socket Screw
