1. Click the icon
on cellphone.
2. Select Model “VITUS-Starlight”,
touch “Go to connect”.
3. Enter main interface.
Walkera Drone
11.2 APP Connection
Connect the operation app. Walkera Drone
11.1 Aircraft Starting/Code-matching
11.0 Ready for Flight
Insert the battery.
Start remote controller and smart flight battery.
Place aircraft at horizontal position,
right red LED light flashing until steady on indicates completion
of
IMU prewarming & code-matching.
(Right/left red LED lights alternatively flashing indicates aircraft being abnormal, see also APP tips.)
10.0 Prepare for Remote Controller
1. Unfold antenna &
mobile device holder.
2. Pull upward mobile device holder, place a cellphone
and clamp it. Adjust antenna & mobile device holder,
make their included angle between 30°~45°.
Mount the tablet support,
maximum size of the
tablet can be up to 8.0”.
30°~45°
30°~45°
Place the aircraft in an open outdoor area, with its tail facing the operator.
Open the Mobile Wi-Fi device and wait for 30 seconds, when at the same time “Vitus-Ground-***”
and “Vitus-Air-***” appears, click “Vitus-Ground-***” , input password “1234567890” to connect and
exit settings after a successful connection.
Connected
AUTO Mode
GPS Ready
GPS Ready
Quick Start Guide
Starlight
9