background image

English

   - 21 -

• The frequency and channel differ depending on the area.
• The transmission speed differs depending on the 

distance and number of obstructions between the 

transmission  products,  the  configuration  of  these 

products, the radio wave conditions, the line traffic 

and the products that you use. The transmission may 

also be cut off or may get disconnected depending 

on the radio wave conditions, DECT phones or any 

other WiFi 11b appliances. The standard values of 

the transmission speed are the theoretical maximum 

values for the wireless standards. They are not the 

actual speeds of data transmission.

• The location where the transmission is most effective 

differs depending on the usage environment.

• The Wireless feature of the TV supports 802.11 a,b,g 

& n type modems. It is highly recommended that 

you should use the IEEE 802.11n communication 

protocol  in  order  to  avoid  any  possible  problems 

while watching videos.

• You must change your modem’s SSID when there are 

any other modems around with the same SSID. You 

can encounter connection problems otherwise. Use 

a wired connection if you experience problems with a 

wireless connection.  

Configuring Wireless Device Settings

Open the 

Network Settings

 menu and select 

Network 

Type

 as 

Wireless Device

 to start connection process.

Press the 

Yellow

 button to scan the wireless networks. 

A list of available networks will be displayed. Please 

select your desired network from the list. 

Note: 

If the modem supports N mode, you should set N 

mode settings.

If the selected network is protected with a password, 

please  enter  the  correct  key  by  using  the  virtual 

keyboard. You can use this keyboard via the navigation 
buttons and the 

OK

 button on the remote control. 

Wait until the IP address is shown on the screen.
This means that the connection is now established. To 

disconnect from a wireless network, highlight 

Network 

Type

 and press 

OK

.

You can navigate between menu tabs by pressing left/

right buttons. The help bar on the bottom of the dialog 

shows  features  that  you  may  use.  Press  the 

Blue

 

button to check your internet connection speed. Press 

the 

Green

 button to switch to advanced mode and then 

press the 

OK

 button to edit settings.

Other Information

Configuration Status:

  Displays  Wi-Fi  status  as 

Connected

 or 

Not

 

Connected

.

IP Address:

 Displays the current IP address.

Network Name:

 Connected networks’ name will be 

displayed.

Delete Saved Wi-Fi Profiles

Saved profiles will be deleted if you press the 

Red

 button 

while the wireless device selection OSD is on the screen.

Connecting to your mobile device via WiFi

• If your mobile device has WiFi feature, you can connect 

it to your TV via a router, in order to access the content 

in your device. For this, your mobile device must have 

an appropriate sharing software.

• Connect to your router following the steps stated above 

in the 

Wireless Connectivity

 section.

• Afterwards, engage your mobile device with the router 

and then activate the sharing software on your mobile 

device. Then, select files that you want to share with 

your TV.

• If the connection is established correctly, you will be 

able to access the shared files from your mobile device 

via the Media Browser of your TV.

• Enter the Media Browser menu and the playback 

device selection OSD will be displayed. Select your 

mobile device and press the 

OK 

button to continue.

• If  available,  you  can  download  a  virtual  remote 

controller application from the server of your mobile 

device application provider. 

Note: 

This feature may not be supported on all mobile 

devices.

Connectivity Troubleshooting

Wireless Network Not Available

• Ensure that any firewalls of your network allow the 

TV wireless connection. 

• 

Try searching for wireless networks again, using the 

Network Settings

 menu screen.

If the wireless network does not function properly, try 

using the wired network in your home. Refer to the “Wired 

Connectivity” section for more information on the process.
If the TV does not function using the wired connection, 

check the modem (router). If the router does not have a 

problem, check the internet connection of your modem.

Connection is Slow

See the instruction book of your wireless modem to 

get information on the internal service area, connection 

speed, signal quality and other settings. You need to 

have a high speed connection for your modem.

Distruption during playback or slow 

reactions

You could try the following in such a case:
Keep at least three meters distance from microwave 

ovens, mobile telephones, bluetooth devices or any 

other Wi-Fi compatible devices. Try changing the active 

channel on the WLAN router.

Содержание WP3214SMWI


































Отзывы: