Walker WP2209LCD, Руководство по эксплуатации, Страница: 16 / 31

English - 15 -
Switching the TV On/Off
To Switch the TV On
• Connect the power cord to the 220-240V AC,
50 Hz.
• Press STANDBY button. Then the standby
LED lights up.
• To switch on the TV from standby mode either:
• Press the button, P+ / P- or a numeric
button on the remote control.
• Press the -P/CH or P/CH+ button on the TV.
The TV will then switch on.
Note : If you switch on your TV via
PROGRAMME UP/DOWN buttons on the
remote control or on the TV set, the
programme that you were watching last
will be reselected.
By either method the TV will switch on. When
the TV is operated for the first time, the
following screen appears:
By pressing “ ” or “ ” button, adjust the
“Language” item and press “ ” to highlight
“Country” item. Use “ ” or “ ” button to set
“Language” . Use “ ” or “ ” buttons to select
“TXT Language” and set it by using ” or “ ”
buttons. Press “ OK ” or “ RED ” button to
continue.
To Switch the TV Off
• Press the button on the remote control or
STANDBY button on the TV, so the TV will
switch to standby mode.
• To power down the TV completely, unplug
the power cord from the mains socket.
Input Selection
Once you have connected external systems
to your TV, you can switch to different input
sources.
• Press the AV button on your remote control
until the desired source is highlighted. The
TV will then switch to the selected source
after a short while.
SOURCE : TV
ENG-22784W-MB30-1055UK-1HDMI-YPBPR-SPDIF-LOUT-CVBS-WO PC-WO SVHS-50130255.p65 02.07.2008, 17:00 15