manualshive.com logo in svg

Walker S18, Руководство оператора

Поделиться
Скачать
Walker S18 Скачать руководство пользователя страница 55

S18 

Maintenance Instructions 

Lubrication

51

10.  Start the engine and check for oil leaks around 

the oil filter.  Stop the engine, recheck the oil 

level, and add oil if necessary.  (When the 

engine is first operated with a new oil filter, the 

oil level will drop slightly as the filter is filled 

with oil.)

Oil Filter

Oil Filter Location

Grease Fitting and Oil Point Lubrication 

Lubricate the grease fittings and oil points 

after 

every 25 hours

 of operation.  Lubricate 

more 

often

 when operating in 

dusty or dirty condi-

tions.

  Use SAE general purpose lithium or molyb-

denum base grease for grease fittings and light 

machine oil (SAE 10) to lubricate oil points.  Lubri-

cate the locations shown in the 

Chassis and Deck 

Lubrication Points 

illustration on page 53.

NOTE:

  PTO universal joints (on the deck and 

trac tor) require routine lubrication 

after every 25 

hours

 of running time.  Remove tractor PTO quick 

disconnect tube assembly for easy access to 

grease fittings.

NOTE:

  The best way to lubricate the PTO tube 

half of the universal joint assembly is to remove it 

from the tractor.  See instructions for removing and 

install ing PTO quick coupler, refer to 

Deck Installa-

tion on page 21.

NOTE:

  The ball bearings on the PTO drive shaft 

are sealed and do not require periodic mainte-

nance.

Содержание S18

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды