Walker Rider Lawnmowers MBSSD Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 84

background image

Assembly Instructions

18

4.

Reaching under the tractor, join the PTO tube to
the PTO shaft (align arrow decals). Slide the
PTO tube onto the spline shaft on the tractor
PTO drive shaft.

Mower Deck Installation

(PTO Shaft Connection)

5.

Slide the deck the rest of the way on the deck
arms.

Mower Deck Installation

6. Install the lynch pin through the hole on the end

of each support arm to lock the deck in place
(refer to

Deck Counterweight Spring Installa-

tion

photo). Two (2) lynch pins are included in

the owner's packet of materials.

7. Remove Installation Tool from coupler ring and

make sure the ring has “snapped” securely on
the spline shaft.

IMPORTANT: DO NOT

operate tractor with

Quick Coupler Installation Tool installed.

IMPORTANT:

To prevent damage to the

mower, make sure the PTO shaft assembly is
securely locked on the tractor, with the locking
balls fully seated in the groove and the ring in the
full forward position (refer to the

Coupler Ring

“Locked” Position

photo). After installation,

pull on the shaft to check for security.

Coupler Ring “Locked” Position

8. Raise the mower body (instead of lifting the

front of deck) and clip the counterweight springs
to the receptacle on front of body. Lower the
body to tension the springs. (Refer to

Deck

Counterweight Spring Installation

Photo.)

9. With the counterweight springs connected, the

weight on the deck caster wheels should be 15
to 25 Ib (6.8 to 11.3 kg). Check this weight by lift-
ing on the front of the deck carrier frame. If
required, the spring tension can be adjusted by
tightening or loosening the elastic stop nuts lo-
cated underneath the lower spring hook. Refer
to

Deck Counterweight Spring Installation

photo.

Deck Counterweight Spring Installation

Arrows on Shaft and Tube

(used to align when sliding together)

Grease Deck

Support Arms

PTO

Connection

Deck Support

Arms

Spring-Loaded Coupler Ring

In Fully Forward Position

Lynch Pins

Lock Deck On

Support Arms

(not visible)

Counterweight Springs

Clip Onto Body

With Body Tilted Up

Spring Tension Adjustment

Nut Located Under Lower

Spring Hook (not visible)

«
...
20
21
22
23
24
...
»

Содержание MBSSD





















































































Отзывы:

Нет отзывов

Похожие инструкции для MBSSD

Бренд: Yard Machines Страницы: 44

Бренд: Yardworks Страницы: 21

Бренд: Poulan Pro Страницы: 60

Бренд: McCulloch Страницы: 80

Бренд: Simplicity Страницы: 45

Бренд: AL-KO Страницы: 652

Бренд: Snapper Страницы: 224

Бренд: Snapper Страницы: 256

Бренд: Worldlawn Страницы: 19

Бренд: Agri-Fab Страницы: 16

Бренд: SaMASZ Страницы: 37

Бренд: Worx Страницы: 10

LANDROID WG757E

Бренд: Worx Страницы: 21

LANDROID L WG792E

Бренд: Worx Страницы: 20

Бренд: Viking Страницы: 371

Бренд: BEAL Страницы: 46

Бренд: EINHELL Страницы: 17

Бренд: Dolmar Страницы: 88

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды