Step 22
P.26
Copyright
©
2019, by Walker Edison Furniture Co., LLC. All rights reserved.
17
OR
Slider arm
Slider bracket
x 2
Insert the assembled drawer (17) into the unit frame, extend the Ball Bearing Slide Tracks on
the pedestal Side Panel all the way forward .Then align the Slide Runners on the assembled
drawers with the Slide Tracks and push the drawer carefully inside until it stops.
Note : if the drawer does not go in smoothly, please take it out and repeat the step. If you need to
remove the drawer, please pull the drawer all the way out, then push the plastic release lever of
the ball bearing slide up on one side and down on the other side, and then pull it completely out.
