background image

PROTECT THE ENVIRONMENT - BE A CLEAN BOATER

The practice of clean boating and good environmental stewardship make sense economically, for our family’s health 

and safety, for the environment, and for the future of recreational boating. Clean Boating includes all aspects of boat 

maintenance, operation, and housekeeping. Care must be taken during cleaning, fueling, motoring, pumpout, and trash 

disposal to minimize potential effects on the aquatic environment.

Cleaning Your Boat:

When washing a boat’s deck and hull surface, people often use products that contain toxic ingredients. See MAINTE-

NANCE for guidelines on how cleaning agents should be chosen.

Fueling and Bildge Maintenance:

Take precautions not to over

fil

l your fuel tank. If you ov

erflow onto the boat or dock, wipe up the sp

ill with a rag; do 

not hose it into the water. If you do spill fuel or oil into the water, do not disperse it with detergent or soap! That only 

sends the pr

oblem down to the seafloor whe

re it becomes more toxic and more di

fficu

lt to clean up. If the spill is large 

or if it discolors the surface of the water, you must report it to the local authorities. Failure to do so is illegal and can 

cost you civil penalties and/or criminal sanctions.

Exhaust Emission:

Increased exhaust emissions (hydrocarbons) cause water and air pollution. To achiev

e the highest efficienc

y, have the 

engine properly tuned and the hull cleaned regularly.  See the engine manufacturer’s manual for engine tuning direc-

tions.

Clean Motoring:

If you become grounded, do not attempt to motor your way out. This could cause serious damage not only to your mo-

tor and propel

lers, but also to the seafloor and local marine o

rganisms. If you sight a marine mammal such as a mana-

tee, dolphin or whale, slow down and keep a safe distance of at least 100 yards. It is illegal to feed, harass, molest or 

injure a marine mammal.

Clean Trash Discharge:

Stow all loose items, plastic bags, drink cans, and other articles properly so they do not blow overboard. Never discard 

your garbage overboard. Whatever you take aboard, bring back. 

Do not oper

ate the boat under the influence of drugs or alcohol or a

ny other impairment or disability.

Observe right-of-wa

y as defined 

by “Rules of the Road” and required by COLREGS.

Obey signs for restricted areas designated for swimming, bathing or other forms of recreation.

Learn to control your boat and know the limitations of your capabilities and the capabilities of your 

boat. If necessary take a boating course to learn these limitations.

Inform someone of your Float Plan including time and place of departure, proposed route and expected 

time of return.

Содержание Generation 450

























Отзывы: