Part of the device
Cleaning
Housing
Use a microfiber cloth to remove light and
stubborn dirt
Modeling lamp, flash
tube
Wipe off with dust brush or dry, soft cloth
ADVICE:
Don´t clean the modeling bulb and flash tube
with water. Even small residues on the bulb
could lead to bursting.
Reflector
Remove dirt with microfiber cloth
13.3.
Change micro-fuse
WARNING
Danger of electric shock and fire through short-circuit
A micro-fuse, which is not conform with the required specifications, doesn´t
protect against the overloading of the device.
Please just use a micro-fuse, which is conform with the required
specifications. See
Technical Specifications
.
•
Switch off device.
See
Switch the device on and off
.
•
Disconnect from power supply:
Unplug power supply unit/battery.
•
Open fuse holder:
Use a small screwdriver to lift up the fuse holder carefully and slightly.
A
Fuse holder
•
Pull out the fuse holder completely out of the slot.
•
Take out the old micro-fuse.
•
Slide the new micro-fuse carefully into the slot and turn it with a
screwdriver clockwise.
14.
Accessories and options
You can find extensive accessories for your walimex pro device in our
webshop.
15.
Spare parts
Part of the device
Item number
Additional battery for Battery Pack RD-600
16700
Standard Reflector
16701
16.
Disposal and environment protection
Your device should be disposed free of charge at the local disposal points.
Pay attention to the disposal of the battery.
A
20
21