Walimex Pro W1 TTL T-O, Руководство пользователя

Страница: 40 / 56

37
NOTICE
Min. refers to the minimum power output value that can be set in M/Multi mode.
1/128 or 1/256 can be set according to C.Fn-05. The minimum power output value
is 1/128 and cannot be set to 1/256 for most of camera flashes. However, the value
can change to 1/256 when using in combination with walimex pro strong power
flashes e.g. Flash2Go 600 TTL.
7.6 Multi flash group ON/OFF settings
1. Open the multi flash in the C.Fn Custom Functions (set C.Fn-04 as on).
2. Short press the <GR> button to select the group. With select dial chose downwardly
and upwardly.
3. Short press the <MODE> button to change the mode of selected group.
4. The current group’s mode will be changed by the order of on/-- (-- represents OFF,
which means that the current group will not fire flashes in this mode).
7.7 Multi flash parameter setting
1. Enter into multi flash mode before setting.
2. Press the <MODE> Button to enter multi flash parameter setting menu.
3. Then, P (output value), T (flash times) and H (flash frequency) will be displayed on
the LCD panel.
4. Short press the <GR> Button to choose the settings. Turn the Select Dial to change
the blinking setting amount. Continue to press the <GR> Button until all the amounts
are set. Then, short press the <MODE> Button to exit.
21704_walimex pro Funkauslöser W1 TTL T-O_BDA.indd 37 3/12/2018 1:59:38 PM