E
29
4.2 Button Function
Button operation function
Button
Bedienung
Funktion
MODE
Short Press
Select M/MULTI in sequence
MODEL
Short Press
Adjust brightness of modeling lamp
AUDIO
Short Press
Turn on and off audio beep
Long Press 4 seconds
Set color temperature mode
SLAVE
Short Press
Turn on and off optical slave
Long Press 4 seconds
Set channel, group and ID
TEST
Short Press
Test
Regulator
Rotate
Adjust parameter
Short Press (In Multi Mode)
Set number of flash and flash frequency
5. Prepare Flash for Use
5.1. Fix Flash on Light Stand
Select a light stand or support system of
suitable weight and dimensions to ensure
stable operation of the unit. Rotating “Light
Stand Locking knob” clockwise to lock flash
unit firmly on support system.
5.2. Remove Protective Cap
Please remove the rubber cap on the latch
knob before use. To remove protective cap,
push “reflector Release Knob” back towards
the rear of the unit and rotate protective cap
anti clockwise (Figure 1). Put the protective
cap aside.
WARNING
Do not operate the flash with the protective
cover still in place. To avoid deformation of
plastic protective cap, always cool down
flash unit before fitting protective cap.
Figure 1
