Wali GSDM002-P, Руководство по установке

Страница: 6 / 12

D
1.Guide Grommet Base Plate
I
through Bolt
H
and
connect them to Base
D
from the bottom using
M6x12 Bolt
N
and tighten with 4mm Allen Key
r
.
2. Tear off the protective paper to attach Anti-Skid Pad P to
the bottom designated position of Base
D
as image shown.
P
D
H
R
N
D
I
Option B Grommet Base Installation
I
H
N
R
3a. Existing Grommet Hole Installation
If the existing grommet hole comes with a plastic
protector, remove it to ensure a flat surface before
installing the desk mount.
Mark the position of the hole on your mounting surface.
Drill a 3/8"(10mm) diameter hole at the marked position
through the mounting surface.
3b. Self-drilled Grommet Hole Installation
0.4’’-3.3’’
0.4’’-3.3’’
ø 10mm
(ø ") 3/8
P
6
D
D
D