14
13
Replace the batteries if:
• The weak battery symbol appears on the display.
• Nothing appears on the display when the power is
switched on.
As the supplied batteries are for test only, they may be
discharged earlier than batteries you buy in stores. Replace
all batteries at one time (as simultaneous set). Use only
1.5V AAA alkaline batteries. Remove batteries when unit is
not in use for extended periods of time. Date and time will
need to be reset if batteries are removed or replaced. Clean
contacts on battery and in battery compartment with a soft
dry cloth each time you install batteries.
Note:
Batteries are hazardous waste. Do not dispose of them
together with the household garbage.
WRIST POSITIONING GUIDE
• When using wrist blood pressure monitors, it is important
to take the measurement while relaxing your wrist at heart
level. This will help ensure an accurate reading will be taken.
Because it is difficult to find the ideal location for a wrist
measurement we have included an optional Wrist Positioning
Sensor that will assist in directing your wrist to the ideal
location for a blood pressure measurement.
• After you press
START/STOP button, the display will
illuminate with different icons that are designed to help you
move your wrist. Once the ideal location is found, the Pulse
Symbol will flash and measurement will begin.
SYMBOL
ACTION
Move your wrist up.
Move your wrist down.
Rotate your wrist to your left.
Rotate your wrist to your right.
• If
and any of the following letters and numbers appear
in the area that systolic pressure should be displayed or the
wrist icon appears, an error has occurred with your reading.
Component Error: Measure again
Wrist is not in the ideal position: Measure
again. Once the wrist positioning sensor
guides your wrist to your ideal location, keep
arm still until measurement is completed.
PM
AVG.
3
UP
DOWN
ROTATE
RIGHT
LEFT
PM
AVG.
3
UP
DOWN
ROTATE
RIGHT
LEFT
PM
AVG.
3
UP
DOWN
ROTATE
RIGHT
LEFT
PM
AVG.
3
UP
DOWN
ROTATE
RIGHT
LEFT
PM
AVG.
3
UP
DOWN
ROTATE
RIGHT
LEFT
