Waldorf RNL8510G, Инструкция по установке и эксплуатации

Страница: 17 / 32

15
Operation
Lighting the Oven Main Burner
1. Ensure pilot burner is alight.
2. Rotate thermostat control knob anti-clockwise to desired
temperature marked on knob.
3. Main burner will ignite automatically, from pilot burner.
Turning the Oven to ‘Stand-by’ (Pilot ‘ON’ Only)
NOTE: DO NOT attempt to rotate T hermostat Control Knob
anti-clockwise back to ‘Pilot’ position as Knob and
Gas Valve will be damaged.
1. Rotate thermostat control knob clockwise to ‘Pilot’
position. Main burner will extinguish and pilot burner will
remain alight.
Oven ‘Shut-Down’
NOTE: DO NOT attempt to rotate T hermostat Control Knob
anti-clockwise back to ‘O’ Off position as Knob and
Gas Valve will be damaged.
1. To turn 'Off' oven completely,
partially depress
thermostat control knob whilst turning clockwise to 'O'
Off position, pilot burner will extinguish. DO NOT fully
depress Thermostat Control Knob whilst trying to
rotate clockwise to Off position as Knob and Gas
Valve will be damaged.
Control Knob in Main
Burner Operating Position
Rotate Knob Anti-Clockwise
to Operating Temperature
Control Knob in
Pilot Position
Rotate Knob Clockwise to Pilot Position
Piezo Igniter
Button
Control Knob in
’Off’ Position
Partially Depress and Rotate
Knob to the ‘O’ Off Position.
IMPORTANT:
Should any abnormal operation like;
- ignition problems,
- abnormal burner flame,
- burner control problems,
- partial or full loss of burner flame in normal operation, appliance requires IMMEDIATE
service by a qualified service person and should not be used until a service is carried out.