Waldorf RN8813G, Инструкция по установке и эксплуатации, Страница: 25 / 32

23
Griddle
Pilot Burner
a. With the gas supply turned off at the main supply,
remove the griddle plate section by lifting it
straight off the cook top.
b. Remove the gas control heat shield from around
the griddle burner, this is just a push in fit.
c. Disconnect the thermocouple and the piezo igniter
from the mounting bracket. (For access purposes).
(See Fig 27).
d. Disconnect the pilot supply tube from the pilot
burner with a 13 mm (½") spanner. (See Fig 27).
e. Remove existing pilot injector and replace with the
correct size for the gas being used. Refer to the
‘Gas Specifications’ table at the end of this section,
for correct injector sizes.
f. Re-connect the pilot supply tube to the pilot burner
with a 13 mm (½") spanner. (See Fig 28).
g. Refit the piezo igniter and thermocouple to the
mounting bracket. (See Fig 28).
h. Repeat Items a) to g) for all griddle pilot burners.
Main Burner
a. Remove the main burner from the burner box by
removing the securing screw at the end of the
burner, this will reveal the main burner injector.
(See Fig 27).
b. Remove and replace the main burner injectors with
correct size injectors. Refer to the ‘Gas
Specifications’ table at the end of this section, for
correct injector sizes.
c. Refit the burner to the griddle burner box.
d. Refit the gas control heat shield to the griddle
burner box.
e. Refit the griddle plate section to the top of the
cook top.
f. Repeat Items a) to e) for all griddle main burners.
g. Turn ‘ON’ the gas supply at the mains, re-light the
griddle burners and check the flame size on the
‘LOW’ flame position.
Low Fire Adjustment
a. To adjust the griddle burner ‘LOW’ fire adjustment,
remove the griddle gas control knobs from the
front of the control panel.
b. Adjust the low fire adjustment screw on the griddle
gas control valve only, to obtain the desired flame
size. (See Fig 29).
NOTE: The “Low Fire Screw” should be sealed with
coloured paint on completion of the low fire
adjustment.
Gas Conversion and Specifications
Fig 28
Piezo Igniter Thermocouple
Pilot Burner
Gas Control
Heat Shield
Fig 27
Burner
Securing
Screw
Low Fire Adjustment Screw Fig 29