background image

Basic Operation – Panic Function

Waldorf Q User’s Manual

24

  Switching off: 8

After counting down to 0 the Q will switch off. If you release the 

Power 

button before, the

shutdown process is cancelled.

Panic Function

The 

Power

 

 button is also used to perform a Panic function. The Panic function sends and executes

an "All Notes Off" command to terminate stuck notes. Panic immediately sets all envelopes to their
release phases. Panic also stops the step sequencer and the arpeggiator playing when running in Hold
mode.

To activate this function, briefly press 

Power

 

.

When holding 

Power

 

 a bit longer, all sound is suppressed and the release phases are cancelled.

System Volume

You can use the 

System Volume

 control 

 to adjust the Q’s master volume. The volume setting is

global and affects the levels of all audio outputs including the digital output.

Demo Playback

The Q is equipped with several demo songs to show some of its unique features. They should give
you a quick overview of the Q’s sound character and the possibilities you can expect when you start
working with your Q. To listen to the songs in highest quality you should make sure that the Q is
connected stereophonically to a good amplifier/loudspeaker combination. Alternatively, you could
use good headphones.

 

The Demo Playback mode clears all edit buffers. If you should have made any changes to
existing programs that you would like to keep, you should store them now. However, stored
programs aren’t affected in any way.

 

To start the Demo Playback:

 

Press 

Multimode

 and 

Peek

 simultaneously. The Q shows a selection of various demo

songs.

 

Press one of the highlighted 

Number Buttons

 to listen to a particular demo song or press

Start/Stop

 to listen to all demo songs in sequence.

 

To play back another demo song:

 

Press another highlighted 

Number Button

.

If you got a clue what the Q is capable of, it is time to leave the Demo Playback and to start exploring
it yourself.

 

To exit the Demo Playback Mode:

 

Press 

Multimode

 and 

Peek

 simultaneously. The Q returns to normal operation.

Содержание Q Synthesizer












































































































































































Отзывы: