manualshive.com logo in svg

Waldorf Pulse, Руководство пользователя

Поделиться
Скачать
Waldorf Pulse Скачать руководство пользователя страница 56

56

User’s Manual Pulse • PulsePlus

14.1 Tuning the Filter

The filter is tuned at the factory prior to shipping and, as a rule, is very stable. However, the
Pulse is an actual analog synthesizer, so diverse factors may cause slight tuning problems.
Therefore we recommend that you re-calibrate it from time to time. On demand, the Pulse
executes this function automatically.

☞

This is how you activate the Filter Tune function:

• Press the 

Shift

key 

햺

and hold it down.

• Briefly press the 

Mode

key 

햶

. You are now at level at which Sysex data transfer is

executed. The Filter Tune function is also located here.

• Release the 

Shift

key 

햺

.

• Use the scroll key 

▲

햻

to call up the Filter Tune function. It is located right after

the All Dump function.

• Press 

Dump

햶 

again while holding the 

Shift

key 

햺

down.

The filter is tuned automatically.

This process can take up to 30 seconds. The following functions are executed:

• First, the filter is tuned to its fundamental frequency. This means the filter is

adjusted to 440Hz at maximum oscillation of the resonance frequency. The display
indicates the current value for the filter cutoff frequency.

• Then the filter is tuned an octave above the fundamental frequency, i.e. to 880Hz.

���

The Pulse's audio output is switched off during the filter tuning process. Once the
filter has been tuned properly, the Pulse is ready to be played.
The Filter Tune function can also be activated via a MIDI Tune Request command.
Conversely, the Pulse  sends a MIDI Tune Request when the "Tune" function is
activated.

Filter Tune:

Содержание Pulse















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды